Derby Drag Strip

                                        2 Lanes and 31 feet of pure Speed

These pictures are worth a thousand words.

1. The starting gate is one of the 2, 12" plastic track pieces.

2. The tall upright posts are held together with one 12" and one 6" plastic piece

3. The short posts are held in place with two 6" plastic pieces. Then the short posts are screwed to the middle hole in the second Track section .

4. The Track sections, which are all numbered for you, are bolted together.

The rest of the Track just nests together with no bolts. Overlap each section about 3".

Just set the starting area of the Track on a table top, and you are ready to Race your Cars

Stop the cars at the end of the Track, with a towel, jacket, blanket, sweatshirt, "any �ol thing".